DPSI Magnetschaltgeber RV FamilieNovel switching transmitter for the DPSI current supply systems, which becomes actuated with an external magnet and therefore it works touchless.
The advantages are obvious: there are no more big holes for the switching cut-out in the body necessary. A 3 mm hole for the LED display is enough. The switching transmitter becomes sticked with silicone on the inside of the body and then it becomes clipped at the DPSI. The switching operation occurs with an external magnet, which becomes held in the on and off position of the magnet switching transmitter. The lightened control LED indicates the switch on operation and an imminent low voltage with a blinking code. Because of the small measurements the magnet switching transmitter is perfect for small bodies (e.g. sailboat hulls) and does not damage the surface. The measurements amount 46x14x4 mm at a weight of 17 g.