DPSI RCS Micro
The Remote Control Switch is an electronic on/off switch shiftable with a remote control. The switch position can be programmed optionally. It is appropriate as an ignition switch for the ignition of gas engines. You can switch off the ignition system with the throttle in lowest position, in the idle position it gets switched on. You can also connect other loads e.g. lightening, pumps or the like. The current circuit of receiver and the load to be switched are electronical disconnected, so there is no negative interference. An integrated micro controller controls the battery tension of the load and it warns with a blinking code of the lightened LED display if there is low tension. 5 to 7 cells NiCd/NiMH and 2 cells LiIon/LiPo batteries are getting supported.