Emcotec Universal Akku Tester 6-16,8 VThe EMCOTEC UniversalTester is a high-precision measurement equipment with optical display (bargraph). On the one hand the UniversalTester informs you with 16 luminous diodes of the tension range of the battery and on the other hand the UniversalTester act as display for the servo position of the receiver exit.
A few battery types can be controlled from the UniversalTester: 2S, 3S, 4S LiPo, 5 or 6 cells NiMH, 2S, 3S, 4S LiFePo4. The UniversalTester can also be used as bargraph. In this case every LED of a linear stress increase of 100 mV, 200 mV, 300 mV, 400 mV or 500 mV can be used. The display range reaches from approx. 6 V to 14 V. Various display modes enable an exact assessment of the power input.
The mounting is safed against vibrations because of two cable sleeves with two screws.
Power input: approx. 17 mA in the middle (130 mA top)
Connection cable: JR/Uni with gold contacts, 30 cm
Intelligent multiple measurement equipment - easily configurable
16 illuminating diode for the display of various functions (bargraph)
Battery status test: Indicates the recharge status of the battery
Tension monitor: Indicates the tension of the tension supply per bargraph
Servo impulse monitor: Indicates the servo position of the receiver output
Alert output for an external contol LED
Huge working voltage range from 6 V to 16,8 V (up to 4 S LiPo)
Scope of delivery: Universal tester with JR/UNI connection cable and operating instructions