TOP SERVICE TOP SUPPORT
FREE SHIPPING FROM € 120,-*
150.000 PRODUCTS OF OVER 500 BRANDS

JetCat LCU-Pro Modellbeleuchtung

Mfr. No. 61162-30
Article No. 81644
  • worldwide shipping
  • top service
  • shops in Vienna & Deutschlandsberg
  • online shop 24h/day
  • my no. 1
MORE
€ 149.90 VAT incl. / plus postage
out of stock, cannot currently be delivered

JetCat LCU-Pro Modellbeleuchtung

• Easy programming with only 2 keys in 3 sections
• LCU switches on and off with RC, you do not need an extra key
• Completely opto isolated inputs
• Can be actuated parallel to the turbine battery
• 3 different and independent RC inputs / outputs (V cable on board)
• All RC inputs are galvanically seperated with an optocoupler
• 1 input for control/current supply of the LCU with the JetCat ECU
• 14 outputs; 11x multifunctions, 2x afterburner, 1x switching output
• Automatic switch over to the choosed current rating
• 22x 1W - lockable emitter (every output has up to 2 LEDs)
• 2x afterburner rings directly connectable (regulated 6,6 V) afterburner get automatically fired in the ECU mode at high speed
• Every output dispose a control LED • Status LED (green/yellow/red) programming help and tension control
• Battery connection with MPX plug for RC duty
• While ECU duty you can get the tension from the turbine battery
• Every output function can be free allocated to a RC input
• Comprehensive laying and combination possibilities
• Software update possibilities
• Automatical recognise of the servo running direction
• Automatical recognise if RC or ECU mode
• In the ECU mode the switch on of the speed trap, the position lights etc. and the after burner get controlled with the ECU.
Battery under tension, the turbine status, empty tanks or failsafe becomes indicated with the lamp.
• Shapely, solid, anodised aluminium faceplate (at the same time cooling element function)

Technical details:
Measurements: 15 x 73 x 51 mm
Weight: 50 g
Current supply: 2 Lipo cells
Inputs: 3x RC inputs from the receiver
1x dates/current connection to the ECU
Output: 14x outputs for lamps. 11x current controlled, 2x tension controlled (e.g. for afterburner or headlights)
1x switching output

Example for using helicopter:
The ECU actuates the function of the position lamps and ACL lamp. The landing light becomes controlled with a free RC channel.
Turbine out: postion lamp, ACL = OUT
Starting activity triggered: ON
Ignition occurs: postion lamps & ACL for 4 sec. ON
Engine idle rotation speed reached: position lamps = ON
Full throttle rotation speed reached and solid: ACL= ON
Turb. off/after cooling: position lamps & ACL = OUT
After cooler out: All lamps off
Special features:
Motor fuel empty: position lamps are blinking every 4 seconds
Battery empty: All lamps OUT
Failsafe recognised: position lamps & ACL are blinking quickly
No reviews found
Write a customer review
Top Branches
Our Service
Free shipping from € 120,-*
Free shipping
from € 120,-*
Worldwide Shipping
Worldwide Shipping
Top Service
Top Service
Shops in Deutschlandsberg & Vienna
Shops in Deutschlandsberg & Vienna
Over 150.000 products<br>of over 500 brands
Over 150.000 products
of over 500 brands

Anmelden &
Profitieren

verpasse nie mehr top angebote und aktionen