Motorprüfstand HolzWooden assembly set for an engine test station
• Suitable for all E-engines and impeller
• can be used with a dead weight tester and hanging scale
• test station with which you can easily test E-engines and batteries.
To measure the tensile force in a sailer is nearly impossible, you need nearly 5 hands to measure the parameters. You need two hands to hold the model, one to use the remote control, one to hold the measuring device in front of the air screw and the other hand operates the set. If the test station becomes screwed on a table or on a chair (e.g. on the airfield), you can accomplish the measurements unhurriedly. With only two hands. One hand for the remote control truncheon and one for the set and always with a big distance to the air screw. The test station is suitable for engines with a diameter of approx. 50 mm. Bigger engines can be fixed in the foundation board mounting. In connection with a measuring device for current and tension and an electronic hanging scale the model maker has all dates at a glance. So you can adapt the E-engines optimal on the number of cells and the air screw.
Assembly set content: milled and solid ply wood parts, GfK engine carrier, small parts.